ALUMINIUM
We are capable of providing top of a line assortment of alloys, hardeners, and other ingots. They are developed with precision and quality to ensure that client requirements are met. These products are available at market-leading prices.
*Standard Ingot and Smaller Bars can be supplied.
*Customized solutions can also be accommodated.
PRODUCT FORMS
- Aluminium Ingot – ADC 12
- Aluminium – Titanium Hardener (AlTi5)
- (5%Titanium)
- Aluminium – Copper Hardener (AlCu30)
- (30% Copper)
- Aluminium – Magnesium Hardener(AlMg10)
- (10% Magnesium)
- Remelted Aluminium Ingot
ZINC ANODES AND ALLOYS
Zinc Anodes, which we manufacture, are of the highest quality. We use only special high-grade zinc ingots with a purity of 99.99% which have been tested and certified, as our raw material for the manufacturing process. This is done to ensure that quality is not compromised at any stage of the manufacturing process.
PRODUCT FORMS
• Zamak-5, Zamak-3
• Zinc Anode – Balls
• Zinc Anode – Nuggets & Cubes
• Zinc Anode – Plates
• Zinc Anode – Oval-Shaped Rod
(18”, 24”,27” up to 42” available)
• ZincAnode-Rectangle Rod
(18”x3”x11⁄2”)
• Zinc Ingots
TIN ANODES
We are direct importers of pure virgin Tin Ingots
with a purity of 99.99% which has been tested and
certified. This material being used as our raw material for the manufacturing process of Tin Anodes ensures that quality is not compromised and the Tin Anodes, we manufacture, are of the highest quality. Tin Squares and Sticks give the unique advantage of zero wastage and as an easy additive.
PRODUCT FORMS
• Tin Anode – Pyramids & Bits
• Tin Anode – Sticks 1⁄2“x12”
• Tin Anode – Plates (18x8x1⁄2”)(18x4x1⁄2”)
• Tin Anode – Briquettes
• Tin Lead Anode
• Chrome Anode
BRASS SHEET
• ICC Sheet (65/35) (67/33)
• Commercial Sheet
• Brass Circle
COPPER SHEET
• Copper Sheet
• Brass & Copper vessels
ALUMINIUM ANODES
Aluminum anodes can be used for the protection of storage tanks and are installed on ship hulls and jetties. They also have a specific use for protecting sub-sea pipelines, oil rigs, and semi-submersibles.
CHARACTERISTICS & COMPOSITION
Iron | 0.13% max |
Silicon | 0.08 – 0.2% |
Copper | 0.006% max |
Zinc | 2 – 6% |
Indium | 0.01 – 0.02% |
Others | 0.02% max |
Aluminum | Remainder |
Potential Ag/AgCl | -1.05V (min) |
Anode Capacity Ah/Kg | 2550 (min) |
In addition to the standard compositions mentioned, Vaishnavi Metals also manufactures other compositions to suit the specific requirements of other sites and structures.
ZINC ANODES
Zinc anodes used for cathodic protection are cast from the highest purity zinc (99.995%) alloyed with aluminum and silicon to minimize impurities and cadmium to give uniform dissolution with loose dispersible corrosion products. The most widely used specification for zinc anodes is US Mil Spec 18001J for cathodic protection.
COMPOSITION
ELEMENTS | STANDARD (Wt.%) | HIGH POTENTIAL (Wt. %) |
Copper | 0.005% max | 0.005% max |
Aluminum | 0.10 – 0.50 % | 0.005% max |
Iron | 0.005 % max | 0.0014% max |
Cadmium | 0.025 – 0.07% | 0.003% max |
Lead | 0.006 % max | 0.006% max |
Others | 0.10% max | ——– |
Zinc | Remaining | Remaining |
CHARACTERISTICS
Open circuit potential Vs Ag/AgCI — 1.05 V
Capacity – 780 AH/kg
Zinc Anodes perform reliably in water and with resistivities up to 1000 Ohm cm and have a driving potential of 250 mV against protected steel at normal ambient seawater temperatures. This driving potential reduces the temperature rises as zinc should not be used where temperatures above +50 Deg C are likely to occur
Vaishnavi Metals: Anodes Division is currently in the process of expansion to include the manufacture of other sacrificial anodes such as magnesium anodes, anodes for buried structures, mixed metal oxide coated titanium anodes, water heater anodes as well as tank anodes in order to serve all client requirements.